Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


PB 150 V8-318 5.2L VIN T 2-BBL (1983)

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Service and Repair > Removal and Installation > Page 2624

Page 2
background image

CAUTION:  Excessive vise pressure will cause bore distortion and binding of piston.

8. Remove dust boot using suitable tool.

Fig. 11  Piston Seal Removal

9. Using a small, pointed, wooden or plastic stick, work piston seal out of its groove in piston bore. Discard old seal. 

CAUTION:  Do not use a screwdriver or other metal tool for this operation, because of possibility of scratching piston bore or burring edges of
seal groove.

Assembly

Fig. 12  Piston Seal Installation

1. Clamp caliper in vise (with protector jaws).

CAUTION:  Excessive vise pressure will cause bore distortion and binding of piston.

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Service and Repair > Removal and Installation > Page 2624

[PREV PAGE] [NEXT PAGE]