Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


PB 150 V8-318 5.2L VIN T 2-BBL (1983)

Steering and Suspension > Steering > Steering Column > Component Information > Service and Repair > With Tilt > Page 2923

Page 5
background image

Fig. 19 Tilt wheel steering column exploded view. Front wheel drive Mini-Vans/Wagons

Fig. 20 Lock plate retaining ring removal

1. Remove bracket assembly to column jacket attaching bolts.
2. Remove wiring protector from column jacket.
3. Attach holding fixture C-4132 or equivalent to column, then mount column in a vise by clamping at holding fixture.
4. Remove tilt lever and turn signal or speed control lever.
5. Push hazard warning knob and remove by unscrewing, then remove ignition key lamp, if used.
6. If not removed previously, remove steering wheel using a suitable puller. Do not attempt to remove steering wheel using a hammer, as damage

to steering column and shaft will result.

Steering and Suspension > Steering > Steering Column > Component Information > Service and Repair > With Tilt > Page 2923

[PREV PAGE] [NEXT PAGE]