Workshop Repair Manuals

Plymouth Workshop Manuals

[PREV PAGE] [NEXT PAGE]

plymouth Workshop Repair Guides


PB 150 V8-318 5.2L VIN T 2-BBL (1983)

Steering and Suspension > Steering > Steering Column > Component Information > Service and Repair > With Tilt > Page 2936

Page 9
background image

19. Install bearing on steering shaft. Do not hammer shaft into the bearing or bearing onto shaft as damage to steering column or shaft may

result.

20. Install upper snap ring on shaft, then install and torque the 3 bearing housing to lock housing screws to 35 inch lbs.
21. Install wiring trough in place over wires, being careful not to pinch wires between trough and jacket.

Steering and Suspension > Steering > Steering Column > Component Information > Service and Repair > With Tilt > Page 2936

[PREV PAGE] [NEXT PAGE]