911 Carrera Coupe F6-3164cc 3.2L (1984)
Pressing The CV Joint Onto The Axle Shaft
4. Pack the CV joints evenly on each side with approx. 40 grams of special grease. A packet of approx. 90 grams is included with each replacement
boot.
Applying Special Grease To The Outer CV Joint
5. Slide the CV boots into position on the inner caps and install the retainer clips.
6. Coat the sealing surfaces of the closing cap and inner caps with the special sealant contained in the repair kit.
Correctly Installed CV Boot
7. Line up the holes for the fastening bolts and carefully press the closing covers and inner covers onto the CV joint.