911 Carrera Coupe F6-3164cc 3.2L (1984)
-
Drive on seal for speedometer drive with special tool P 374.
Oil Pump Disassembly/Assembly
NOTE: Because of the ability to interchange Porsche transmissions, it is possible to find an oil pump equipped transmission in a later model.
Disassembly
-
Record the thickness and number of gaskets when removing the oil pump cover to simplify reassembly.
Note the proper orientation of the bushings. Mark the lubricating hole.
-
Use a KUKKO inside puller to remove bushings of oil pump gears from oil pump cover.
-
Place a protector between the puller and the cover to avoid damage to the sealing surface.
Reassembly
-
Drive bushings into oil pump cover with special tool P 365, making sure that they are properly positioned and fully in. The milled ends of the oil
pockets must point towards the pressure chamber or oil pump gears, respectively. See sketch for exact location.
