911 Targa (996) F6-3.6L (2004)
Installation position of oil extraction pump at cylinder head 4 - 6 (belt pulley side). The arrow for the direction of rotation or the marking "4 - 6"
must face the crankcase. Fit oil extraction pump. Use new sealing ring and new micro-encapsulated hexagon socket head screws. Tightening
torque 10 Nm (7.5 ft. lbs.)
22. Unscrew auxiliary chain tensioner, put new sealing ring on the original chain tensioner and install. Tightening torque 80 Nm (59 ft. lbs.)
Allocation of chain tensioners
A Chain tensioner, cylinder bank 4 - 6 Identification "Without"
B Chain tensioner on crankcase Identification "1 ring"
C Chain tensioner, cylinder bank 1 - 3 Identification "2 rings"
Installation position of the chain tensioners (engine in installed position)
Chain tensioner on the crankcase
Chain tensioner on cylinder bank 1 - 3