911 Targa (996) F6-3.6L (2004)
Crankshaft Main Bearing Seal: Service and Repair
Removing and installing crankshaft sealing ring
Removing and installing crankshaft sealing ring
Engine installed (pulley side)
Tools
Removal
1. Remove the air cleaner assembly..
1. Undo collar screw M 6x34.
2. Detach oil filler neck. Undo hose clamp on throttle body and pull plug off the hot film mass air flow meter. Unclip wire on air cleaner housing
and remove air cleaner assembly.