911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-292002.png)
2. Remove drive belt. Mark the running direction of the belt with a colored pen. Relieve the belt tension. To do this, turn the tensioning roller
(wrench size 24 mm) clockwise and simultaneously remove the belt from the drive pulleys.
3. Loosen belt pulley. Undo hexagon-head bolt (M16 x 1.5 x 60) with special tool 9594 (socket wrench insert); to do this, hold with special tool 9593
(retaining device).
4. Remove crankshaft sealing ring. The following tools and parts are required for removal of the crankshaft sealing ring:
