911 Targa (996) F6-3.6L (2004)
Disconnecting Hydraulic and Electrical Control Unit
Disconnecting hydraulic and electrical control unit
1. Remove electrical control unit - in overview 12 -. To do so, bend back the retaining lug at the strengthening rib on the oil temperature sensor.
Removing Solenoid and Control Valve
Removing solenoid and control valve
1. Pull off plastic cover - 1 or 2 in overview.
2. Unscrew screw - 3 in overview -, remove leaf spring - 5 in overview - and pull out solenoid or control valve - 6 to 11 in overview - if necessary
with a pair of pliers.
Installing Solenoid and Control Valve