911 Targa (996) F6-3.6L (2004)
Installing solenoid and control valve
1. Press in new magnet or control valve - 6 to 11 in overview -. Ensure correct seating.
2. Fit leaf spring - 5 in overview - and screw in screw - 3 in overview -.
3. Fit plastic cover - 1 or 2 in overview -.
Reassembling the Hydraulic and Electrical Control Unit
Reassembling the hydraulic and electrical control unit
1. Place the control unit carefully in position. The guide pin must engage in the guide bore of the hydraulic control unit.