911 Targa (996) F6-3.6L (2004)
3.1 Carrera Mod. '98 / some Mod. '99
The standard boost spring A (push rod on boost spring is open on one side / boost spring painted purple) Spare Part No. 996.423.081.09 is no
longer available after existing supplies are used up.
Boost spring B 996.423.081.11 can then be used as a replacement (closed push rod / boost spring painted purple).
This boost spring must not be greased.
When boost spring B is installed for the first time, the optimized clutch pedal 996.423.139.09 must also be used.
Note!
^
Hexagon bolt 999.423.315.06 and retainer 999.166.022.02 are included with the boost spring to enable it to be attached to the optimized
clutch pedal.
^
This scope of delivery is the same as for boost spring type B (as of current Mod. '99).
3.2 Carrera as of current Mod. '99
Boost spring B (Figure 556_98) is used as standard and for replacement.
4. Grease specification
The following grease specification must be observed during assembly work on the pedals.