911 Targa (996) F6-3.6L (2004)
4.1 Pedal bearing axle
Greasing generally necessary.
Lubricate sliding surfaces of the bearing bushings X and the pedal bearing axle with Optimol, Optitemp LG 2, Part No. 000.043.203.37.
A Clutch pedal lever
B Brake pedal
C Steering outer tube
X Bearing bushings
1 Retainer
4.2 Clutch master cylinder push rod
Do not grease, as this could result in damage.
4.3 Area around boost spring
Depending upon the type of boost spring used, greasing is either necessary or not permitted.
The following general rule applies: Do not grease coated parts, as otherwise the coating is lost.
4.3.1 Carrera Mod. '98 / some Mod. '99
A. Boost springs installed as standard: