911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
The wiring harness is routed across a separate 41 mm dia. drill hole into the passenger compartment. Make drill hole at the indicated centerpunch point
in the Transverse wall. The rubber grommet destined for this purpose is fitted to the wiring harness
The power supply leads to the operating unit and handsfree microphone are routed along the passenger compartment wiring harness to the tunnel and
along the tunnel upper edge.
NOTE: On M 692 (optional radio with CD changer), the radio muting wire no. 5 (telephone mute line) is insulated and tied to the harness.
Exception:
With the Munchen RD 104 (M 687) radio with sound package(M 490), the telephone mute line must be connected to contact 4 of connector 1. If a
sound package is not installed, the telephone mute line must not be connected and must remain insulated.
With the Dusseldorf RCR 84 (M336) radio, the telephone mute line must not be connected: tie up the Insulated line.
