911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
9. Remove shaft No. 7 from mounting block.
-
Remove bearing sleeve No. 5, servo spring No. 6 and the assembly of lever No. 9 and rocker No. 16.
10. Remove bearing pipe No. 11 and brake pedal.
Assembling Pedals
1. Check all parts, replace any parts, if required.
-
If the bushings must be replaced, use an appropriate mandrel for removal or installation.
-
Coat all bearings and slide faces with a Teflon-compatible low temperature grease - e.g. Glissando by DEA (Texaco).
NOTE:
-
Check the mounting block for deformations (might stem from removal of lever No. 9).
-
If necessary, remove the mounting block.