911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
times.
5. Install parking brake cable and adjust parking brake.
-
Install brake caliper.
6. Tighten drive shaft on transmission flange and wheel hub.
-
Use new fastening nut.
7. Install cover of control arm 1 & 5 and the underside guards and panels.
NOTE: If drive shafts are installed and removed in accordance with these instructions, alignment measurements are not necessary as there are
only minor changes in wheel alignment. The max. change in toe-in per rear wheel is 5'.
