911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
-
Frame for roll-over protection system as of 08.07.2006. Refer to Dates of introduction as of Vehicle Ident. Nos. for roll-over bar (module) as of
08.07.2006
Can be installed together.
Dates of introduction as of Vehicle Ident. Nos.
Modified roll-over bar (module) and frame for roll-over protection system as of production date 08.07.2006
For details of specific Vehicle Ident. Nos., see table below.
Preliminary work
1. Remove cover for the rear. Refer to Removing and installing cover for rear.
2. Removing rear wall trim panel. Refer to Removing and installing trim panel for rear wall.
3. Fully open the convertible top.
General warning notes
Safety instructions for work on the roll-over protection system
CAUTION: Danger of injury when working on the roll-over protection system.
-
The movement range of the roll-over protection system must be kept clear.