911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
INFORMATION: Actuate the roll-over protection system only if:
-
the hardtop is removed
-
the convertible top is open
-
the caps are removed
1. Connect the PIWIS tester 9718 to the diagnostic socket. Switch on ignition. Select menu item "Roll-over protection", and select menu item "Drive
links" in the command line which then appears. Press the key combination described in the tester; the roll-over protection system is triggered.
2. Unscrew fastening screws -1- from the roll-over bar module -2-.
3. Pull roll-over bar module forwards slightly until the electric plug connection -3- is accessible.
4. Press in locking mechanism -Arrow A- and pull off electric plug connection -3- -Arrow B-.
5. Lift roll-over bar module -2- up and off.
Installing roll-over bar module