911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-200021.png)
43. Fit remaining M8 lock nuts on crankcase bolts. - Tightening torque: 25 Nm (19 ftlb.)
Caution
Removing/fitting the crankshaft pulley.
Danger of injury and damage.
-
The holding wrench must make contact with the pulley when tightening.
-
Get another person to help.
44. Fit pulley. Check the straight pin (5 x 18) for deformation before fitting and replace if necessary.
Straight pin for pulley
45. Fit new straight pin so that it is flush.
