911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-200022.png)
Installation position of straight pin for pulley
46. Always replace fastening screw for pulley. When tightening the pulley, a second person must counter with the special tool holding wrench 9548. -
Tightening torque: 170 Nm (126 ftlb.)
Tightening pulley
47. Fit flywheel.
Subsequent Work
1. Install pistons.
2. Assemble engine - starting with the cylinder housing.
3. Refit the transmission.
4. Install engine.
