911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Visual inspection of the installation position of the outer pistons
Outer pistons in cylinder housing
20. Fit the piston pins into the associated pistons from the inside. The piston pin should only be inserted so far that the connecting rod can still be
fitted.
View of piston pins on outer pistons
21. Detach aluminium sleeves or hoses from the threaded bolts.
22. Fit cylinder base seal above the studs. The "TOP" marking must be facing the observer.
23. Spacers 9651 must be placed on the outer studs.