911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-203014.png)
Greasing O-rings on the cylinder sleeve
29. Position the cylinder sleeve on the studs. Pay attention to the flattened areas on the cylinder sleeve -arrows-.
Inserting middle cylinder sleeve
30. Pushing device 9660 must be fitted on the stud. Lay a plastic washer on the cylinder sleeve and press the cylinder sleeve into place on the piston
(piston junk) by turning the shifting wheel.
Pushing device 9660
