911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Removing oil return line 1-3
1. Remove oil return line 1-3.
1.1. Unscrew screw -1- on holder.
1.2. Remove screws -3-.
1.3. Pull off oil return line -2- on oil pump for turbocharger and oil tank 1-3.
Removing oil return line 4-6
1. Remove oil return line.
1.1. Unclip holder -1- for exhaust emissions temperature sensor on the oil return line -2-.
1.2. Unscrew screw -3- on holder.
1.3. Remove screws -4-.
1.4. Remove oil pipe -5-.
Unscrew banjo bolt -6- and remove oil pipe -5-.
1.5. Pull off oil return line -2- on oil pump for turbocharger and oil tank 4-6.
Installing oil return line
Installing oil return line 1-3