911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
9. Insert both circlips -1- from the side -arrow- and press in until they fully connect with the bracket -2-.
INFORMATION: When installing the flat connectors with the electric connecting lines, the correct installation position in the central connect must be
observed (see wiring diagrams).
10. Insert the three flat connectors together with the electric connecting lines -1- in the central connector -2- -arrow-, until the flat connectors audibly
engage.
11. Using a tie-wrap -arrow A- fasten electric connecting lines to the bracket.
12. Tie electric connecting lines together using a tie-wrap -arrow B-.
Subsequent work
Install rear side section flap. Refer to Removing and installing rear side section flap.