911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Convertible Top Position Sensor / Switch: Service and Repair
Removing and Installing Microswitch For Roof
Removing And Installing Microswitch For Roof
Preliminary work
1. Open convertible top.
2. Remove interior light. Refer to Replacing bulb for interior light.
3. Remove operator control unit for garage door opener. Refer to Removing and installing operator control unit for garage door opener.
4. Remove front lock. Refer to Removing and installing front lock.
Removing microswitch for roof
1. Loosen circlips -1- (by turning them -Arrow a- with a small screwdriver) -2- from the front lock -4- and lift them up and off -Arrow A-.
2. Remove microswitch for roof -3- from front lock -4- by pulling it upwards -Arrow B-.
Installing microswitch for roof
1. Insert microswitch for roof -1- from above -Arrow A- into the front lock -2-.