911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Diagonal brace
Unscrew screws -12, 13- and lock nuts (collar nuts) on the rear-axle carrier side sections. Remove right and left diagonal braces -10-.
6. Remove the cross member -14-.
6.1.
Loosen nuts on the bottom threaded joint (M12 x 80) and pull out the bolts.
6.2.
The top threaded joint -15, 16- (M12 x 80) only needs to be loosened because of the slots.
6.3.
Remove the cross member -14-.
Cross member
Cross member mount, top
7. Remove brake hose bracket on the rear-axle carrier side section.