911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Removing and installing diagonal arm
8. Remove diagonal arm -17-.
8.1.
Remove diagonal arm -17- at the wishbone -21-. To do this, loosen and unscrew the bolts -19, 20-.
8.2.
Remove diagonal arm -17- at the rear-axle carrier side section -1-. To do this, loosen and unscrew the bolts -18, 19-.
8.3.
Remove diagonal arm -17-.
9. Remove upper control arm -8-.
Upper control arms
Remove both control arms -8- at the rear-axle carrier side section. To do this, loosen and unscrew bolts -9, 10- and -11, 12-.
10. Remove lower control arms -13, 21-.
Lower control arms
Remove both control arms -13, 21- at the rear-axle carrier side section. To do this, loosen and unscrew the bolts -12, 15, 22-.