911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-599012.png)
Eccentric threaded joint
11. Fit anti-roll bar on rear-axle carrier side section.
Screw in and tighten screws -1-.
-
Tightening torque: 23 Nm (17 ftlb.)
Fitting anti-roll bar
Subsequent work
1. Install rear underbody panelling.
2. Fit rear wheels.
3. Align the vehicle.
