911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Unscrew screws -2- and remove diagonal braces -2-.
4.2.
Remove crash stop (all-wheel drive only).
Loosen and remove screws -4- and then remove crash stop -3-.
Removing and installing restraining straps
5. Remove restraining straps on the fuel tank.
5.1.
Loosen and remove screws -2- and then remove the restraining straps -1-.
5.2.
Remove fuel tank cover.
6. For all-wheel drive vehicles: Remove the drive shafts on the transmission side.
Removing and installing drive shaft
Remove drive shafts -1- at the front by loosening and unscrewing the screws.
Information
Protect drive shafts against mechanical damage (e.g. with a rubber hose that has been cut open).
7. Remove universal joint at the steering spindle.
Information
^
Use only steering wheel holders that do not project into the area of the airbag unit!
^
If necessary, shorten guide rod at top!