911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Tension shackle for steering-oil lines
9.1.
Place an oil collection pan underneath the repair area.
9.2.
Remove tension shackle -2- for steering-oil lines on the steering gear. Unscrew screw -1- and remove tension shackle -2-.
10. Disconnect coolant lines at the front and rear.
10.1.
Disconnect front coolant lines (at the left and right).
Coolant lines on front axle
Loosen spring clamps on the couplings and pull off coolant hoses -1-.
10.2.
Disconnect rear coolant lines (at the left and right).
Loosen spring clamps on the couplings and pull off coolant hoses -2-.
11. Loosen spring struts at the spring-strut dome.
11.1.
Loosen trim panel in the luggage compartment.
Removing and installing spring struts for front axle
11.2.
Disconnect cable plug -1- for the PASM line.