Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-893002.png)
1. Unscrew fastening nut -1- and remove support -2-.
2. Check support -2- and fastening nut -3- and replace if necessary.
Installing cover for rear underbody
Installing support for underbody cover
1. Position support -2- for underbody cover and tighten with the fastening nut -1-. Tightening torque, Tightening torque: 7 ftlb.±0.5 ftlb.
