Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-893003.png)
Installing underbody cover
INFORMATION: When pushing in the underbody cover, make sure the overlap is correct.
1. Insert cover for rear underbody -3-.
2. Tighten fastening screws -1-. Tightening torque, Final tightening: 1.5 ftlb.±0.5 ftlb.
3. Tighten fastening nuts -2-. Tightening torque, Final tightening: 1 ftlb.±0.5 ftlb.
4. Tighten fastening nuts -4-. Tightening torque, Final tightening: 3.5 ftlb.±0.5 ftlb.
Subsequent work
Lower the vehicle. Refer to Lifting the vehicle.
