Boxster S (987) F6-3.4L (2008)
4. Position tightening strip -3B- with the fourth full slit of the seam in the hole on the main folding top bow and tighten the fastening screw -1- with
washer -2-. Tightening bow: 1.8 Nm (1.5 ftlb.)
INFORMATION: Make sure that the folding aid is routed under the corner bow.
5. Pull folding aid -2- forwards. Rivet folding aid -2- with rivet -1- and washer -3- to convertible top support.
Fastening hood covering on the inside
1. Close the hood.
2. Tighten the hood covering -2- and secure the Velcro fastener -1- in the groove on the rear roof frame.