Boxster S (987) F6-3.4L (2008)
1.1. Position ground strap and screw down with the fastening screw and fastening nut. - Tightening torque: 23 Nm (17 ft. lbs.) - Tightening
torque: 23 Nm (17 ft. lbs.)
Subsequent work
Subsequent work for ground strap and B+ line of battery
1. Carry out work instructions after disconnecting the battery.
Subsequent work for B+ line from power distributor to engine connection point
1. Install engine-compartment lid.
2. Install rear wall cover.
3. Install parking-brake lever.
INFORMATION: For vehicles with automatic transmission.
4. Install selector support.
INFORMATION: For vehicles with manual transmission.
5. Installing gearshift bracket console.
6. Fasten triggering unit.
7. Install power distributor.
8. Carry out work instructions after disconnecting the battery.
Subsequent work for B+ line from starter to engine connection point
1. Install generator.
2. Install throttle housing.
3. Carry out work instructions after disconnecting the battery.
Subsequent work for engine ground strap
1. Lower vehicle.
Removing and Installing Wiring Harness For Centre Console
Removing And Installing Wiring Harness For Centre Console
Preliminary work
Preliminary work for interior monitoring sensor
Remove centre console.
Removing wiring harness for centre console
1. Release electric connectors for the equipment versions (e.g. cigarette lighter, interior sensor etc. -A- and unplug.