Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-629075.png)
1. Position footwell trim panel -3- ( -arrow A- ) and screw down with both plastic nuts -2-.
2. Fasten carpet -1- at the bottom in the area of the A-pillar -arrow B- using double-sided adhesive tape or suitable adhesive.
Installing wire harness for door trim panel
INFORMATION:
-
The wire harness for door trim panel spare parts scope means the scope for fully-equipped vehicles. Depending on the vehicle equipment,
connectors not required are tied to the wire harness for door trim panel using tie-wraps.
-
When doing this, ensure the lines are routed correctly so that no line becomes trapped or damaged.
