Boxster S (987) F6-3.4L (2008)
1. Insert wire harness into the clips on the door trim panel in -direction of arrow-.
2. Clip connector on plug connection for wire harness for door trim panel to door wire harness into the door trim panel -arrow A-.
3. Push connector onto the door warning light -7-.
4. Plug in connector on switch for memory seat adjustment -4- until it engages securely.
5. Plug in connector on midrange loudspeaker -3- until it engages securely.
6. Plug in connector on switch for power windows -2- until it engages securely.
Subsequent work
Subsequent work for wire harness for door
1. Install head airbag.
2. Install power window motor.
3. Install door trim panel.
4. Connect the battery and carry out "Work instructions after disconnecting the battery.
Subsequent work for wire harness for door trim panel
1. Install door trim panel.
2. Connect the battery and carry out "Work instructions after disconnecting the battery".
Removing and Installing Wiring Harness For Electrically Adjustable Seat
Removing And Installing Wire Harness For Electrically Adjustable Seat
Preliminary work
Remove front seat.
Removing wire harness for electrically adjustable seat
INFORMATION: This description covers the two-piece wire harness for an electrically adjustable seat with memory. Some plug connections will not
be present on a single-piece wire harness without memory.