Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-928003.png)
1. Lay line in cable duct and push on cover -Arrow A- until locking tabs -Arrows B- are felt to engage.
2. Push cable duct with line onto rear lid hinge -Arrow C-.
3. Pull harness through window frame -Arrows A-.
4. Press rubber sleeve into window frame until it is felt to engage -Arrow B-.
INFORMATION: During removal, replace damaged clips with repair clips.
5. Clip wiring harness to window frame -Arrows C-.
INFORMATION: During removal, replace damaged clips with repair clips.
6. Clip in wiring harness -arrows-.
7. Tighten ground strap and torsion protection -a- to ground pin with fastening nut -Arrow 1-. - Tightening torque: 6.5 ftlb.
