Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-928004.png)
8. Push connector onto rear window wiper -Arrow A- until locking tabs are felt to engage.
9. Push connector onto lock lower part for rear window -Arrow C- until locking tabs -Arrows B- are felt to engage.
10. Push plug connection for contact switch together -Arrows D- until locking tab -Arrow E- is felt to engage.
11. Insert plug connection into support -Arrow F- and turn it until it is felt to engage in the clip -Arrow G-.
Installing wiring harness, right side of vehicle to lid hinge
1. Push wiring harness through to the rear from the inside -Arrow A-.
INFORMATION: The lead must run over the pneumatic spring.
2. Pull socket through pneumatic spring housing -Arrow B- until rubber sleeve is felt to engage -Arrow C-.
3. Push blue socket into socket support -Arrow A- until locking tabs -Arrows B- are felt to engage.
