Cayenne GTS (9PA) V8-4.8L (2008)
Fitting the spindle
4. Loosen the suspension subframe bearing on both sides, carefully lower the gear support (loosen the spindle carefully at the same time) until you
get the clearance needed for using the press-out tool.
5. Press out suspension subframe bearing.
Tools for pressing out front-axle bearings at the front
Information
Hold the hydraulic cylinder VAS 6178 tightly while pressing it out.
Pressing out front-axle bearing at the front
6. Attach the tools as shown in the illustration and press out the bearing.
Information
When replacing bearings, please make sure that one arrow is pointing in the direction of travel while the other arrow is pointing away from the
direction of travel.
7. Fit suspension subframe bearing and pay attention to installation position.