Cayenne GTS (9PA) V8-4.8L (2008)
Fuel Injector: Service and Repair
Removing and Installing High-Pressure Fuel Injector (DFI)
Removing And Installing High-Pressure Fuel Injector (DFI)
Tools
Technical values
Preliminary work
1. Read out engine control unit fault memory before getting started and print log.
2. Switch off the ignition and all loads when working on the fuel system.
3. Disconnect the battery.
4. Remove intake-air distributor (intake module).
5. Remove high-pressure distribution pipe (fuel rail).
Information
Component overview
INFORMATION: