Cayenne GTS (9PA) V8-4.8L (2008)
4. Place new sealing ring -2- onto mounting cone no. 5 -1-. Using assembly sleeve no. 6 -3- (knurling facing the sealing ring), push sealing ring
gently as far as it will go onto mounting cone no. 5.
5. Turn assembly sleeve no. 6 -3- around (knurled side now no longer facing sealing ring), and push sealing ring -2- onto the end of mounting cone
no. 5 -1-.
6. Place mounting cone no. 5 with sealing ring onto the fuel injector from the front -1-. Using assembly sleeve no. 6 -2-, push sealing ring further
onto the fuel injector.
The sealing ring is not yet seated in its groove.
7. Remove assembly sleeve no. 6 and mounting cone no. 5. Push sealing ring into the ring groove using assembly sleeve no. 6.
Calibration (shaping) of Teflon sealing ring: