Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-656007.png)
fluid level several times as required.
6. Allow the engine to run while stationary for approx. 10 minutes (scavenging the PDCC system). Then connect the PIWIS Tester.
7. Select the Cayenne PDCC menu item and work through the following points in sequence. Follow the instructions on the PIWIS Tester:
^
Drive links >> Valve timing.
^
Drive links >> Bleed.
^
Drive links >> Perform system test.
^
Read out and erase fault memory.
^
Perform a test drive.
^
Read out the fault memory again.
