Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-1056002.png)
4. Use the pole terminal puller 60 x 40 NR.99 to pull the wiper arm off the wiper linkage and remove the wiper arm.
Installing wiper arm for rear window wiper system
1. Switch on ignition and move rear wiper motor to its end position by activating it once.
2. Switch off the ignition.
3. Fit wiper arm -3- and secure with the fastening nut -2-. - Tightening torque: 12 Nm (9 ftlb.)
INFORMATION: Before fitting the cap, check the retaining lugs of the cap for damage. The cap must be replaced in the event of damage or if you
have any doubts about it.
4. Fit cover cap -1- and press in until it is felt to engage.
