Cayenne S (9PA) V8-4.5L (2003)
12. Slide the design cover of the cylinder bank 1 - 4 under the secondary air pump as shown in the picture and then slide the cover of the second
ignition coil through underneath the torque support bracket.
13. Press down the 2 rubber mounts on the support. The rubber mounts must engage firmly.
14. Tighten the 4 fastening screws on the ignition coils to 4 - 5 Nm (3.0 - 3.5 ftlb.).
15. Install engine compartment cover on the right.
Replacing ignition coils in the cylinder bank 5 - 8
NOTE: A rag should be placed between the secondary air pump and the design cover to prevent the cover from being scratched.
1. Unscrew the 4 fastening screws on the ignition coil cover.