Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-1397002.png)
3. Mark the installation position -arrow- of the -halves of the stabilizer bearing- for the stabilizer with a paint marker.
4. Carefully pull out the anti-roll bar.
Installing stabilizer
Installing anti-roll bar
ATTENTION:
Danger of injury and material damage if the wheel carrier is raised incorrectly.
^
Crushing and other injuries can occur due to slipping parts.
^
Do not raise the wheel suspension higher than the normal vehicle position (vehicle resting on wheels). When raising the suspension, use a
suitable intermediate layer (hard rubber).
^
Do not damage the brake cover plate.
Note:
