Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-1397006.png)
2. Loosen the 2 lines (center in Figure) and counter with an open-ended wrench. Seal the lines with suitable plugs. Remove the plug (left arrow).
3. Undo the 4 fastening screws and remove the clamps.
4. Mark the installation position (arrow) of the halves of stabilizer bearing for the stabilizer with a paint marker.
5. Carefully pull out the stabilizer.
Removing off-road stabilizer - V6
