Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-1404005.png)
6. Fit -stone shield on CDC sensor (arrow)-.
7. Attach the pressure pipe on the residual pressure restraint valve using a suitable open-ended wrench. Then, clip the pressure pipe into the retaining
devices.
8. Remove protective tube from drive shaft.
9. Fit rear wheel.
10. To fill the air suspension (the system must be filled with compressed air), use the -Porsche System Tester-. To do this, select the menu item Fill air
suspension in the Air suspension system.
