Cayenne S (9PA) V8-4.5L (2003)
17. Remove the -snap ring-.
18. Remove the wheel bearing (tools).
19. Press out the wheel bearing. To do this, position the pipe and the mount T10205/5 and T10205/4 in the correct position on the wheel bearing
housing. Insert the tubular piston cylinder VAS 6178. Position the pressure piece T10205/6 and the nut for the threaded rod 8-2.
Installation
Note!
^
The wheel bearing must not come into contact with magnetic objects (e.g., magnetic screwdriver, magnet).
^
The entire threaded parts of the axle must be tightened in vehicle position. Vehicle position means: vehicle standing on the wheels, or the wheel
suspension is being raised with a universal vehicle lift. -Dimension X-, from lower edge of wing to middle of axle 502 mm ± 10 mm corresponds
to vehicle position.