Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Fastening screw for balancing clip
8. To remove and disengage the ball head(s) of the cables, the nut on the threaded rod -arrow- can be loosened by a few turns. (Note the number of
turns! Mark the nut, if necessary).
Fastening nut for balancing clip
9. Push the ball head out of the balancing clip of the deflector in the direction of the arrow -see figure- and remove it sideways. Press the sleeve of
the cable in the interior (two plastic lugs) gently together and push through to the rear, against the direction of travel.
Removing brake cable from balancing clip
10. Remove the sheet metal clips -see figure- for the parking-brake cables at the fuel tank (underbody) with a screwdriver.