Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-752006.png)
Arrangement of tools for pressing out hydraulic/rubber-metal mounts
Pressing in:
Tools for pressing in hydraulic/rubber-metal mounts
-
T10230/2
-
T10230/11
-
T10230/12
-
T10230/14
-
T10230/15
Information
When using the pressure pieces, the direction arrow shows the direction for pressing the rubber-metal mounts in or out on the trailing arm.
Information When pressing the mounts in, make sure that pressure piece 11, in particular, is positioned correctly. Pressure piece 11 must not cover up
the bore for the bearing in the control arm!
The pressure pieces are used as follows:
