Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
2. Undo the four fastening screws and remove the clamps.
3. Mark the installation position -arrow- of the anti-roll-bar mount halves with respect to the anti-roll bar with a paint marker.
4. Carefully pull out the anti-roll bar.
Installing stabilizer
Caution
Increased risk of accidents if the wheel carrier is raised improperly!
^
Danger of injury and risk of damage to property.
-
Do not raise the wheel suspension higher than the normal vehicle position (vehicle resting on wheels).
-
When raising the suspension, use a suitable intermediate layer (hard rubber).
-
Do not damage the brake cover plate.
Information
^
The entire threaded joints of the axle must be tightened in vehicle position. Vehicle position means: vehicle standing on the wheels, or the wheel
suspension is raised with a universal vehicle lift. Dimension -X-, from lower edge of wing to middle of axle 506 mm ±10 mm corresponds to
vehicle position.
^
Visually inspect all parts.